WhisperKool XLT 8000 Ducting, R T I N G, 85F Max, Exhaust Side, Using the Thermostat Controller

DUCTING

A WhisperKOOL XLT ducting kit is available for purchase. The kit allows the warm air to exhaust to several places such as an attic, an adjacent room, or outside. The goal is to get the warm exhaust air away from the rear intake of the unit.

The customer will need to purchase 8” flex ducting, along with any hangers needed to run the ducting outside.

See page 29 for more information on purchasing a XLT ducting kit.

XLT Ducting Kit

8” flex ducting
	Drainline
85°F Max	Plug
Temperature

EXHAUST SIDE

Shown here: Ducting through ceiling

Using the Thermostat Controller

The in-line fan will turn on and push warm exhaust air away from the WhisperKOOL® unit, preventing the unit from overheating. The in-line fan is capable of moving warm air through 25 feet of 8” flex ducting (not included). The in-line fan can be set to automatically turn on at varying temperatures in order to conserve the most electricity.

Setting the Thermostat Controller to its lowest setting will turn the fan on at lower temperatures (Around 70° F). Setting the Thermostat Controller to its highest setting will turn the fan on at higher temperatures (Around 100° F). If the unit isn’t cooling properly, setting the thermostat controller to a lower setting may fix the problem.

LO

S

T

A

R

T

I

N

G

HI

					E
					R
			A	T	U
		R
		E
		P
	M
E
T

Page 18 XLT 020111