Entering Your Program | White Rodgers 1F94W-71 guide

ENTERING YOUR PROGRAM

Follow these steps to enter the heating/cooling program you have selected.

NOTE

We recommend that you remove the thermostat from the wall for programming (especially for entering cooling programming). A fresh 9 volt Energizer® alkaline battery must be installed to perform off-wall programming. BE SURE SYS-

TEM SWITCH IS SET TO OFF POSITION BE- FORE REATTACHING THERMOSTAT TO SUBBASE!

You cannot program the thermostat with the SYSTEM SWITCH in the AUTO position.

Set Current Time and Day

SET

1. Press CLOCK once. The display will show

minutes only.

EXAMPLE:

2. Press and hold either TIMEFWD or BACKTIME until you reach the correct minutes.

SET

3. Press CLOCK once. The display window will

show the hour only.

EXAMPLE:

4. Press and hold either TIMEFWD or BACKTIME until you reach the correct hour and AM/PM designa- tion (AM begins at midnight; PM begins at noon).

24

Image 24

White Rodgers 1F94W-71 manual Entering Your Program, Set Current Time and Day

Contents

1F94W-71 About Your New Thermostat Questions and Answers Your NEW THERMOSTAT’SOperating Your Thermostat Programming Your Thermostat Your NEW THERMOSTAT’S Features Use To turn thermostat OFF be Parts of the Thermostat Back of The Thermostat Body Use Display Time SET Thermostat Buttons System Time SET View Hold Operating Features Automatic Changeover TWO Hour Temperature Over Convertibility Press Time Buttons to adjust anticipation. Press At the same time. The display willAt the same time again. The display Cooling anticipation. Use HEAT/EMER/OFF COOL/AUTO Total Keypad Lockout Programming Your Thermostat Your Home 70F Cooling Temperatures Heating/Cooling Schedule Plan Sample Entering Your Program Set Current Time and Day Program Heating/Cooling Temperatures Gramming after this happens, press Prgmview until Program Heating/Cooling Times Heating Temperatures Page Using the HOLD/COPY BUTTON, or Program Cooling Temperatures Operation. USETo Turn Ther Mostat OFF Before Reattaching the Thermostat to the Subbase Using The HOLD/COPY Button Button, or press Press To select the day you want to Thermostat to subbase. Then press How can I permanently change a part of my program? Time FWD and Back Time to changeGramming Your Thermostat Programming Your Thermostat Why can’t I program the thermostat in the Auto mode? ING Your Thermostat Until Display is flashing BATTERY. What does this mean? Ating Your Thermostat See Operating Your THERMO- Stat Why is the system turning on and off so frequently seldom? Ming Your Thermostat Part No -5525A