Program Cooling Temperatures
!CAUTION
If outside temperature is below 50°F, we recommend that you remove the thermo- stat from the wall before proceeding with the following steps to program cooling temperatures. Personal injury or prop- erty damage may occur due to air condi- tioner compressor slugging. A fresh 9 volt Energizer® alkaline battery must be installed to perform
operation. USE | SYSTEM | TO TURN THER- |
HEAT/EMER/OFF/ | ||
| COOL/AUTO |
|
MOSTAT OFF BEFORE REATTACHING THE THERMOSTAT TO THE SUBBASE!
1.To program cooling temperatures for the heating/cooling periods you have already
set, press | SYSTEM | until COOL is displayed. |
HEAT/EMER/OFF/ | ||
| COOL/AUTO |
|
VIEW
2. Press PRGM once. The Monday heating/
cooling period 1 start time you just pro- grammed will appear, and the currently pro- grammed cooling temperature (A, B, C, or D) will be displayed.
3. Press 
or 
to display the COOL A, B, C, or D temperature you want for Monday’s heating/cooling period 1.
4. Press PRGMVIEW , then press 
or 
to select Monday’s COOL A, B, C, or D tem- perature for period 2.
5. Repeat steps 3 and 4 for Monday’s heating/ cooling periods 3 and 4.
29
