OPERATING YOUR THERMOSTAT

Before you begin programming your thermo- stat, you should be familiar with its features and with the display and the location and operation of the thermostat buttons. The information in this section will help you become familiar with your new thermostat so that you can easily program it.

Your thermostat consists of two parts: the ther- mostat body and the subbase.

!CAUTION

Use

SYSTEM

to turn thermostat OFF be-

HEAT/EMER/OFF/

 

COOL/AUTO

 

fore removing or attaching the thermo- stat body. Equipment damage and/or per- sonal injury could occur.

The subbase is attached to the wall, but you can remove the thermostat body for easy program- ming. To remove the thermostat body from the subbase, grasp the thermostat body and gently pull it out from the bottom of the subbase and pivot up. To attach the thermostat body, line up the four terminal pins on the upper section of the thermostat back with the matching connector on the subbase. Insert these, then gently pivot the thermostat body down to connect the eight pin connectors on the lower portion of the thermo- stat back. Gently push until the snap connectors engage. DO NOT FORCE OR PRY THE THER- MOSTAT as this may damage the unit.

5

Page 5
Image 5
White Rodgers 1F94W-71 manual Use, To turn thermostat OFF be