to the programming instructions to correct the error.
6.Press PRGMRUN .
7. Press | SYSTEM | until COOL is displayed. |
HEAT/EMER/OFF/ | ||
| COOL/AUTO |
|
8.Repeat steps 2 through 5 to check cooling temperatures.
9.Press PRGMRUN to begin program operation.
YOUR THERMOSTAT IS NOW COMPLETELY PROGRAMMED AND READY TO AUTOMATI- CALLY PROVIDE MAXIMUM COMFORT AND EFFICIENCY!
Press | SYSTEM | until OFF is displayed. Reattach | ||
HEAT/EMER/OFF/ | ||||
| COOL/AUTO |
|
|
|
thermostat to subbase. Then press | SYSTEM | to | ||
HEAT/EMER/OFF/ | ||||
COOL/AUTO
select the operation mode you want (HEAT, COOL, AUTO).
NOTE
When you have completed programming, you may set option switch #3 (see TOTAL KEYPAD LOCKOUT in the OPERATING FEATURES section).
32
