NOTE
To operate properly in the AUTO mode, there must be a minimum 1°F separation between the highest heat temperature and the lowest cool temperature (see diagram below).
79 | COOLING TEMPERATURES | ||
78 | |||
|
| ||
77 |
| DEAD BAND 1°F | |
76 |
| ||
75 | HEATING TEMPERATURES | ||
74 | |||
|
| ||
73 |
|
| |
2. Determine the time periods during which you will program the temperatures you have just selected. You must program 4 periods for each day (periods 1, 2, 3 & 4). However, you may use the same heating and cooling temperatures for consecutive time periods. Also keep in mind that, for any given day,
you can only program one set of times for both heating and cooling (for example, if you select 5:00 AM to begin heating period 1 on Monday, then your cooling period 1 for Monday will also begin at 5:00 AM). How- ever, you may choose different time periods for each day separately (for example, heat- ing/cooling period 1 on Monday may begin at 5:00 AM, but heating/cooling period 1 on Saturday may begin at 9:00 AM). Use the following table to plan your program time periods, and the temperatures you want during each period. You may also want to look at the sample program table to get an idea of how the thermostat can be pro- grammed.
21
