Wolf ICBCT30IU manual To complete the activation, touch one

W O L F INDUCTION COOKTOP U S E & C A R E

COOKTOP O P E R AT I O N
To activate an induction element, touch the				To change the heat setting—the element is
	touch pad that corresponds to the			activated and the power bar indicator graph
element you wish to use. The power bar				remains steadily lit:
indicator graph will begin to blink and show				Touch ”+” to increase the heat setting by
8 LED indicator bars. Refer to the illustrations
				preset one or two bars on the power bar
below.
				graph.
To complete the activation, touch one of the				Touch ”–” to decrease the heat setting by
following symbols or touch pads of the
				preset one or two bars on the power bar
element control while the bar graph is still
				graph.
blinking:
Touch the ”+” or ”–” symbol to set the heat				Touch	to increase the heat setting
				directly to high.
output to 25% and complete the activation.
					to boost to Hi-Power mode.
Touch		to set the power output to		Touch
the high heat setting and complete the acti-				Touch	or	to decrease the
vation.				heat setting directly to the lowest power.
Touch		or	to set the power	Touch	to turn the element off.
output to the lowest heat setting and
complete the				IMPORTANT NOTE: If no cookware or an
activation.
				incompatible pan is placed on an induction
Touch		to set the power output to		element after activating the element, the
the maximum level and complete the acti-				control will blink for 30 seconds, then the
vation.				element will automatically shut off.

IMPORTANT NOTE: To quickly de-energize all induction elements, use the universal touch pad located in the lower area of the control panel. Refer to the illustration below.

The illustrations below show the control panel of Model ICBCT36I/S.

Power bar

indicator graph

”+” and ”–”

symbols

touch pad

Induction element activation

touch pad

touch pad

Heat settings

Universal

touch pad

Universal OFF touch pad

17