Wolf ICBCT30IU manual To activate the user option, the cooktop, To activate the timer, touch + on

W O L F INDUCTION COOKTOP U S E & C A R E

TIMER  O P E R AT I O N		SOUND  C O N T RO L
The induction cooktop features a countdown		The induction cooktop is equipped with the
timer located in the control panel. The timer		ability to change the volume and frequency, or
may be set to any one-minute increment from		tone, of the touch controls through the user
1 to 99. Once set, the remaining time will be		option, activated through the timer controls.
illuminated in the control panel as it counts			To activate the user option, the cooktop
down. The timer is available for use in any
			must be in Idle mode.
mode except Lock mode.
To activate the timer, touch ”+” on the			Touch and hold	for 3 seconds to
			activate the volume adjustment. The three-
timer control.
			digit display will show ”Uol.”
Touch and hold ”+” or ”–” until the desired			Touch and hold	for 5 seconds to
time is reached. The timer will start 3
			activate the frequency adjustment. The
seconds after the last change in value.
			three-digit display will show ”FRE.”
When the timer reaches 0, the unit will		Both the volume and frequency are adjusted
sound. The reminder will continue to sound
		using the timer ”+” and ”–” touch pads. One
until	is pressed.
		touch equals one step up or down in volume
		or frequency. The power bar indicator graph of
		the rear 1800/3000 W element will show the
		current status of the volume or frequency and
		change with the user’s input. (1 bar = low, 8
		bars = medium and 16 bars = high.)
		As the volume/frequency is adjusted, the
		cooktop will beep with each change. The beep
		will represent the volume/frequency level that
		is currently displayed by the power bar graph.
			To exit the user option and return the
			cooktop to Idle mode, touch		.

Or, if no touch pad is touched for 10 seconds, the level is then stored and the cooktop returns to Idle mode.

Timer controls

Countdown timer

18