Wolfgang Puck WPIB0010C manual Assembly and Use of Food Chopper Attachment, Helpful Hints

TSCDIST_ImmBlderManual 10/16/07 12:10 PM Page 9

Assembly and Use

of Food Chopper Attachment

figure 1	1	Ensure the motor base is unplugged.
	2	Assemble chopper bowl by first placing
		the chopping blade onto the blade shaft in
		the chopper bowl. (see figure 1) Then place
		food in bowl. For best results, solid foods
		should be no larger than 1/2" cubes.
	3	Place the chopper bowl lid on top of the
		chopper bowl. (see figure 2)
	4 Attach the motor base to the chopping
		bowl as follows: Hold the cover firmly with
figure 2
		one hand, while holding the motor base
		with the arrows slightly to the right or left.
		Turn the motor base until it snaps into
		place. (see figure 3).
	5 Plug into 120-volt 60 Hz AC only outlet.
	6	Always use slight downward pressure
		when operating the motor base, while the
		other hand is placed firmly on the bowl
		cover to avoid the bowl from moving.
figure 3		Always ensure your speed selector is on
		“MAX” when chopping. Use a pulse action
		when chopping by pressing and releasing
		ON/Turbo switch.
	7	Do not operate the motor continuously for
		more than 15 seconds when using chopper
		attachment, otherwise food will be too
		finely chopped.
	8	When you are finished, simply release the
		ON/Turbo switch, unplug the motor base,
		and detach it from the chopping bowl lid.

Helpful Hints

•The hand blender can be used in hot liquids. Always use care when using in hot liquids. To avoid splashing when using the hand blender in a saucepan, insert the hand blender into the pan first, set the speed dial to “MIN”, and then press the ON/OFF switch for operation, slowly raising the speed to your desired setting. Caution: Do not tilt or lift the Immersion Blender out of the pan while the motor is running, as a serious burn or injury can occur from food splatter.

•To puree foods, a certain amount of liquid is needed.

Add cooking liquid, broth, juice, milk, or cream, until desired consistency is reached.

•For thorough blending, move blade up and down in mixture until smooth.

•You will achieve better mixing results if you use deep, tall containers.

•For easy cleanup, unplug blender and rinse under running water immediately after using.

•Place liquid ingredients into the beaker first unless recipe specifically states otherwise.

•Before turning the appliance on, immerse the hand blender attachment into the prepared ingredients, thus ensuring they will not spill over.

•For greater efficiency, move the appliance in small outward spiraling circles while mixing, without touching the bottom of the beaker with the hand blender attachment.

•The hand blender attachment cannot blend hard or fibrous ingre- dients unless they are in less than 1/2" pieces, soft ones into 1/2 - 1" pieces.

•Some foods require a small amount of liquid to allow them to move freely around the blades. Soft or wetter foods require less liquid, while dry ingredients require more liquid. Add the liquid a little at a time until the mix gains the required consistency.

•When using the hand blender, ensure the blades are covered to avoid splashing.

9 10