Woods Equipment BB600X, BB840X Safety & Instructional Decals, Replace Immediately If Damaged

SAFETY & INSTRUCTIONAL DECALS

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

Replace Immediately If Damaged!

6 - PN 19924 (PULL-TYPE ONLY)

19924-B

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿WARNING￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Check for leaks with cardboard; never use hand.

Before loosening fittings: lower load, release pressure, and

￿be sure oil is cool.

Consult physician immediately if skin penetration occurs.

7 - PN 1004991 (PULL-TYPE ONLY)

	WARNING	TRANSPORT LOCK
		AND CYLINDER
	RAISED CUTTER CAN DROP AND CRUSH	REQUIREMENTS
	Cutters must be equipped with transport lock.	SINGLE-ACTING FULL
		EXTENSION
	stands.
	All transport components must be functional, kept in good
	Blocking up prevents cutter dropping from hydraulic leak down,
	hydraulic system failures, or mechanical component failures.
	FAILURE TO FOLLOW INSTRUCTIONS CAN	TRANSPORT
1004991	RESULT IN SERIOUS INJURY OR DEATH.	LOCK

BE CAREFUL!

Use a clean, damp cloth to clean safety decals.

Avoid spraying too close to decals when using a pressure washer; high-pressure water can enter through very small scratches or under edges of decals causing them to peel or come off.

Replacement safety decals can be ordered free from your Woods dealer, or in the United States and Canada call 1-800-319-6637.

12 Safety MAN0654 (Rev. 10/19/2007)