Woods Equipment BH7500 Connect Hoses to Hydraulic Manifold Backhoe Only, Backhoe & Loader Removed

2

#1003179 Hose Kit for 1009 Loader Cont’d

Connect Hoses to Hydraulic Manifold (Backhoe Only)

1.Connect backhoe valve OUT hose (red band N) to the tee in the hydraulic manifold RETURN port.

2.Connect backhoe valve IN hose (yellow band M) to the hydraulic manifold PRESSURE port (green band L).

RETURN	Male
	P
PRESSURE
	N
PBY	Male
	L
M
Male	Female
Female	N
	Male
Backhoe	M
OUT	CD5918-9
Backhoe
IN

Figure 24 Backhoe Hose Installation

Backhoe & Loader Removed

NOTE: See Remove Backhoe With Sub-Frame, page 24 to remove backhoe. See Loader Manual to remove loader.

1.Remove all hoses from Hydraulic Manifold.

2.Cover male quick couplers with dust caps.

3.Turn control screw on Hydraulic Manifold back to the

3o’clock position.

IMPORTANT

■When backhoe and loader are removed, the con- trol screw must be turned back to the three o’clock position to prevent damage to tractor hydraulic sys- tem.

Control Screw

DP10

Figure 25 Control Screw in 3 O’Clock Position

MAN0157 (10/12/01) Hydraulic Installation 17