Hydraulic Installation 19
MAN0157 (10/12/01)

#1003179 Hose Kit for 1012/1016 Loader Cont’d

Connect Fittings to hydraulic Manifold

(Cont’d)

NOTE: Refer to manual MAN0104 Loader Mounting Kit
#111767 for installation of loader valve kit #46675
NOTE: Loader valve hose kit #1002657 will be required
to complete this installation. If hose kit is already
installed, many of the fittings will need to be removed.
1. Remov e banjo screw fitting on h ydraulic line above
the return port (not shown). This will allow clearance to
install RETURN port fittings.
2. Install fittings, quick coupler s, dust c ap, a nd color ed
bands to the hydraulic manifold RETURN port as shown
in Figure 27.
3. Install b anjo screw previously removed. Figure 27 Return Port Fittings Installation
4. Install fittings, quick coupler s, dust c ap, a nd color ed
bands to the hydraulic manifold POWER BEYOND
(PBY) port as shown in Figure 28.
A. 66369 Adapter, 3/8 BSTPM x 3/8 NPTF
B. 315030 Adapter, 3/8 NPTM x 3/8 NPTM
D. 66367 Elbow, 3/8NPTM x 3/8 NPTM
G. 66368 Tee run, 3/8
J. 64300 Male quick coupler, 3/8
K. 395065 Dust cap, 3/8
M. 56062 Plastic band, Yellow
22. 315037 Adapter, 3/8 NPTM x 3/4 JICM
24. 316029 Elbow, 3/8 BSPTM x 3/8 NPTF
Figure 28 Power Beyond Fitting Installation
5. Install elbow (24) and adapter (22) to the hydraulic
manifold PRESSURE port as shown in Figure 29.
Figure 29 Pressure Fitting Installation
3
A
G
2
2
B
K
N
J
RET
U
RN P
O
R
T
CD5918-10
J
M
K
D
A
PBY P
O
R
T
CD5918-11
2
2
2
4
PRE
SSU
RE P
O
R
T
CD5918-12