2
#1003179 Hose Kit for 1009 Loader Cont’d
Connect Fittings to Hydraulic Manifold
(Cont’d)
NOTE: Refer to manual MAN0156 Loader Mounting Kit #111768 for installation of loader valve kit #40532
NOTE: Loader valve hose kit #1002656 will be required to complete this installation. If hose kit is already installed, many of the fittings will need to be removed.
1.Remove banjo screw fitting on hydraulic line above the RETURN port (not shown). This will allow clearance to install RETURN port fittings.
2.Install fittings, quick couplers, dust caps and colored bands to the hydraulic manifold RETURN port as shown in Figure 17.
| 4 |
| K |
RETURN | P |
PORT | B |
| |
| G |
| 10 |
| B |
| K |
| N |
J | |
|
Figure 17 Return Port Fittings Installation
3.Install fittings, quick couplers, dust cap and colored bands to the hydraulic manifold POWER BEYOND (PBY) port as shown in Figure 18.
3.315030 Adapter, 3/8 NPTM x 3/8 NPTM
4.316007 Quick coupler set
10.315045 Adapter, 3/8 BSTPM x 3/8 NPTF
A.66369 Adapter, 3/8 BSTPM x 3/8 NPTF
B.315030 Adapter, 3/8 NPTM x 3/8 NPTM
D.66367 Elbow, 3/8 NPTM x 3/8 NPTM G. 66368 Tee run, 3/8
J.64300 Male quick coupler, 3/8
K.395065 Dust cap, 3/8
L.56061 Plastic band, Green
M.56062 Plastic band, Yellow
P.395062 Plastic band, Blue
POWER BEYOND
(PBY PORT)
A
D
K
M
J
Figure 18 Power Beyond Fitting Installation
4.Install fittings, quick couplers, dust caps and colored bands to the hydraulic manifold PRESSURE port as shown in Figure 19.
5.Install banjo screw fitting to hydraulic line above the RETURN port.
PRESSURE |
|
PORT |
|
10 | K |
| L |
| 3 |
4 | |
|
Figure 19 Pressure Fitting Installation
14 Hydraulic Installation | MAN0157 (10/12/01) |
|
