![](/images/new-backgrounds/1094315/9431589x1.webp)
INTEGRAL U-JOINT SHIELDING (USED ON EARLIER MACHINES)
STANDARD DRIVE
REF | PART | QTY | DESCRIPTION |
1 | 24441 | 1 | Integral |
2 | 7398 | 2 | Integral shield snap ring |
3 | 4677 | 2 | Nylon rectangular groove bearing 35R |
4 | 24443 | 1 | |
5 | 24442 | 1 | |
|
|
| LONG DRIVE |
REF | PART | QTY | DESCRIPTION |
1 | 24444 | 1 | Integral shield kit |
2 | 7398 | 2 | Integral shield snap ring |
3 | 4677 | 2 | Nylon rectangular groove bearing 35R |
4 | 24443 | 1 | |
5 | 4919 | 1 | Inner shield 35R |
U-JOINT SHIELDING (PLASTIC) (USED ON LATER MACHINES)
| REF | PART | QTY | DESCRIPTION |
4 | 1 | 1007870 | 1 | Shield kit, plastic |
1 | 2 | 1007871 | 1 | Outer shield, 3.00 x 2.81 x 38.0 |
3 | 3 | 1007872 | 1 | Inner shield, 2.75 x 2.56 x 43.3 |
| ||||
| 4 | 15740 | 2 | Shield bearing |
2 | NOTE: Shield | halves must be cut to length. See | ||
| Assembly Section page 29 for procedures. |
4
CD6906
29977 (Rev. 1/23/2009) | Parts 45 |
|
|