Woods Equipment S106Q-3, S106-3, S105Q-3 Bore & 8 Stroke Hydraulic Cylinder, Part QTY Description

3-1/2" BORE & 8" STROKE HYDRAULIC CYLINDER

To convert a 10475 cylinder to a 18725 cylinder: Remove the rod hex nuts (15) and tie rods (6). Rotate rod end housing 180° so both ports are in line. Reinstall tie rods and hex nuts. Torque to 55 lbs-ft.

To convert a 18725 cylinder to a 10475 cylinder: Remove tie rod hex nuts (15) and tie rods (6). Rotate rod end housing 180° so ports are on opposite sides. Reinstall tie rods and hex nuts. Torque to 55 lbs-ft.

#18725 is a double-acting cylinder. Hoses and fittings are installed in both ports. Vent plug is not required.

#10475 is a single-acting cylinder. Hoses and fittings are installed in one port and vent plug is installed in another port.

Woods purchases hydraulic cylinders from various manufac- turers. These cylinders have small dimensional differences. Each cylinder has a brief identification note. Read each note and find the dimensions or identification features for your cyl- inder. After establishing identification, use the corresponding parts list.

Lantex or Hydroline - Stamped or cast on butt housing (item 8) or rod end housing (item 3).

REF	PART		QTY	DESCRIPTION
2	23540		1	Seal kit (includes 2A - 2G)
2A	-----		1	1-1/4 ID Wiper seal
2B	-----		1	Rod back-up ring
2C	-----		2	1-1/4 ID O-ring
2D	-----		2	3/16 x 3-1/2 OD O-ring
2E	-----		1	3/32 x 3/4 OD O-ring
2F	-----		2	3-1/2 OD Back-up washer
2G	-----		1	Piston seal kit
3	26338		1	Rod end housing
4	25497		1	Piston
5	25496		1	1 - 14 UNS Jam nut
6	-----		4	Tie rod
7	11893	*	1	1/2 x 1/4 Pipe reducer bushing
8	25494		1	Cylinder butt end
9	923	*	4	1/4 x 1-3/4 Cotter pin

REF	PART		QTY	DESCRIPTION
10	1631		2	1 x 3-5/8 Clevis pin
11	11975		1	1/2 NPT Vent plug -or-
11	23547		1	1/4 NPT Vent plug
12	-----		1	Cylinder barrel
15	4391		8	1/2 NF Hex jam nut
16	25661		1	Cylinder rod clevis
17	6698	*	1	3/8 NC Hex lock nut
18	23550	*	1	3/8 NC x 1-1/2 Socket head cap screw
19	26343		1	Cylinder rod
20	10475		1	Hyd cylinder complete (single) -or-
20	18725		1	Hyd cylinder complete (double)
21	4510	*	1	1/2 Pipe plug

Prince - Cylinder barrel (12) length is 10-5/8" long. Diameter of cylinder rod (19) is 1-1/8". Cylinder was sold prior to 1971.

REF	PART	QTY	DESCRIPTION
1	-----	1	Piston rod asy (incl.13, 14, 16-19)
2	23540	1	Seal kit (includes 2A - 2G)
2A	-----	1	1-1/8 ID Wiper seal
2B	-----	1	1-1/8 ID Leather back-up washer
2C	-----	2	1-1/8 ID O-ring
2D	-----	2	3/16 x 3-1/2 OD O-ring
2E	-----	1	3/32 x 3/4 OD O-ring

46 Parts 29977 (Rev. 1/23/2009)