D('+09\eZ_kfgCXk_\ D]^%J`eZ\/&'0
7.Measure the stock with a micrometer.
•If the stock diameter is thicker at the tailstock end, the tailstock needs to be moved toward you half the distance of the amount of the taper (see Figure 21).
•If the stock diameter is thinner at the tailstock end, the tailstock needs to be moved away from you half the distance of the amount of the taper (see Figure 22).
8.Mount a dial indicator so the dial plunger is on the tailstock barrel before making adjustments to the tailstock.
9.Turn another 0.010" off of the diameter and check for a taper. Repeat this process as necessary until the desired amount of accuracy is achieved.
=`^li\21% Tailstock adjustment option #1. |
=`^li\22% Tailstock adjustment option #2. | FG<I8K@FEJ |
|
