-29-
D('+09\eZ_kfgCXk_\D]^%J`eZ\/&'0
FG<I8K@FEJ
Using Manual Feed
You can manually move the cutting tool around the
workpiece with the three handwheels shown in Figure 30.

Longitudinal Handwheel

The longitudinal handwheel moves the carriage left or
right along the bed. This control is helpful when setting
up the machine for turning or when manual movement is
desired during turning operations.

Cross Feed Handwheel

The cross slide handwheel moves the top slide toward and
away from the work. Turning the dial clockwise moves the
slide toward the workpiece.

Compound Slide Handwheel

The compound slide handwheel controls the position of
the cutting tool relative to the workpiece. The graduated
dial is adjustable using the same method as the dial on
the cross slide. Angle adjustment is held by two hex nuts
on the base of the compound slide.
=`^li\30% Carriage controls.
Longitudinal
Handwheel
Cross Feed
Handwheel
Compound Slide Handwheel