-26-
Df[\cD('00D]^J`eZ\/&'.
FG<I8K@FEJ
You can manually move the cutting tool around the
workpiece using the three handwheels shown in =`^li\
)..

:fdgfle[I\jk?Xe[n_\\c

The compound rest handwheel controls the position of
the cutting tool relative to the workpiece. The graduated
dial on the handwheel indicates the depth of compound
rest movement. The angle adjustment is held by two hex
nuts on the base of the compound rest.

:ifjjJc`[\?Xe[n_\\c

The cross slide handwheel moves the top slide toward and
away from the workpiece. Turning the handwheel clock-
wise moves the slide toward the workpiece. The gradu-
ated dial on the handwheel indicates the depth of cross
slide movement.

:Xii`X^\?Xe[n_\\c

The carriage handwheel moves the carriage left or right
along the bed. This control is helpful when setting up the
machine for turning or when manual movement is desired
during turning operations.
DXelXc=\\[?Xe[n_\\cj
=`^li\).% Manual handwheel controls.
Cross Slide
Handwheel
Carriage
Handwheel
Compound Rest Handwheel