Woodstock W1500 manual Commentary Piece Inventory

C. Commentary D. Piece Inventory

The Shop Fox® is a multi-functional accessory fixture which can be used in conjunction with a router table, horizontal borer, shaper, bandsaw, table saw, sander, and various other woodworking machines. Its purpose is to help cut, shape and sand wood, wood composites, and plastics. The Shop Fox® combines conventional clamping methods with unique positioning features to assist in cutting tenons, mortises, rail ends, finger joints, glue joints, and other joints used in woodwork- ing as well as making edge mouldings and raised panels.

Woodstock International is committed to offering top quality products and supporting its products through customer service and technical documentation. This manual represents our latest effort to produce the best documentation possible. If you have any criticisms or comments you feel we should consider in our next printing, please write or fax to:

Technical Documentation

Woodstock International, Inc.

P.O. Box 2309

Bellingham, WA 98227

FAX 1-800-647-8801

Phone 360-734-3482

If you have any parts problems or requests, please con- tact your Woodstock distributor. They will be happy to assist you.

Remove the Shop Fox® from the package. You may want to save the carton in case of return or future storage.

You will notice that most of the Shop Fox® has been preassembled at the factory and little assembly is required on your part. Compare the Shop Fox® to the parts list in the back of this manual to ensure that you have all the pieces.

Upon removal of all items from the package, you should have:

1.Shop Fox® Upper Unit

2.Shop Fox® Lower Unit

3.Lock Knobs (2)

4.Clamping Assembly

5.Angle Stop

6.Clamping Stud W/ Rubber Foot

7.Thumb Screws (2)

8.Aluminum Spacers (2)

9.1/4'' Flat Washer (2)

10.Wing Nuts (2)

11.Allen® Wrenches (2)

After you have completed your inventory, inspect all the parts (especially the contact areas) for burrs and other irregularities which might hinder the assem- bly process. If you find any burrs left over from the machining process, simply sand or file them flat. Please note that while burrs are not a common occur- rence, it is possible that one or more of the parts could have been missed during the manufacturing process.

-4- Shop Fox®