W1747 20" Planer
SET UP
SET UP
Unpacking
The SHOP FOX® Model W1747 has been carefully pack- aged for safe transporting. If you notice the machine has been damaged, please contact your authorized SHOP FOX® dealer immediately.
Items Needed for Set Up
The following items are needed, but not included, to setup your machine:
• Safety Glasses (for each person) | ........................1 | |
• | Solvent Cleaner | 1 |
• Shop Rags for Cleaning | As Needed | |
• Extra Person for Lifting Help | 1 | |
• | Fork Lift | 1 |
• Straightedge (see Page 13) | 1 | |
• | Phillips Screwdriver #2 | 1 |
Inventory
The following is a description of the main components shipped with the SHOP FOX® Model W1747. Lay the com- ponents out to inventory them.
Note: Some parts and hardware may already be installed on the machine. Make sure to check the machine when you use this inventory list.
Box Inventory (Figure 2) | Qty | |
A. | Planer Unit | 1 |
B. | Knife Gauge Assembly | 1 |
C. | Dust Hood | 2 |
D. | Handwheel | 1 |
E. | Table Extension Wings | 1 |
SUFFOCATION HAZARD! |
Immediately discard all |
plastic bags and pack- |
ing materials to elimi- |
nate choking/suffocation |
hazards for children and |
animals. |
TURN OFF and LOCK your 
master power switch so 
no power is available 
to the planer before 
you do any assembly OFF or adjustment tasks. If 
you ignore this warning serious electrical shock may occur, causing
injury or death!
A
E
B | C | D |
| ||
|
|
