W1747 20" Planer
Hardware and Tools |
| |
• Hex Wrenches 3, 4, 5, 6mm | 4 | |
• Wrenches 8/10, 12/14, 17/19mm | 3 | |
• Set Screws | 6 | |
• Hex Bolts | 6 | |
• | Handwheel Bushing (Handwheel) | 1 |
• | Handwheel Handle (Handwheel) | 1 |
• Hex Nut | 1 | |
• Flat Washer 12mm (Handwheel) | 1 | |
• Key 4 x 4 x 10mm (Handwheel) | 1 | |
• Cap Screws | 6 | |
• Flat Washers 6mm (Dust Hood) | 6 | |
If any parts are missing, examine the packaging for the missing parts. For any missing parts, find the part num- ber in the back of this manual and contact Woodstock International, Inc. at (360)
MAKE your shop “child safe." Ensure that your workplace is inaccessible to youngsters by closing and locking all entrances when you are away. NEVER allow untrained visitors in your shop when assembling, adjusting or operat- ing equipment.
Machine Placement
•Floor Load: This machine distributes a heavy load in a small footprint. Some floors may require additional bracing to support both machine and operator.
•Working Clearances: Consider existing and anticipated needs, size of material to be processed through the machine, and space for auxiliary stands, work tables or other machinery when establishing a location for your planer.
•Lighting: Lighting should be bright enough to eliminate shadow and prevent eye strain.
Lifting Planer
The cabinet stand on the Model W1747 is equipped with lifting bars (see Page 5) to lift and place the planer.
When lifting the planer with a forklift, we recommend placing shop rags or cardboard between the forks and cabinet base so you do not scratch the paint.
Figure 3 shows an example of a typical planer with lifting bars being lifted correctly with a forklift.
USE power lifting equipment to lift this planer. Otherwise, seri- ous personal injury may occur.
Figure 3. Example of planer being lifted
using forklift.
SET UP
