![](/images/new-backgrounds/1117416/11741693x1.webp)
Figure 3-8 Switch 2000 TR Management Setup Screen
7Fill in the following fields:
■Device IP Address
■Device Subnet Mask (if applicable)
■Default Router (if applicable)
8Select OK when you have finished Management Setup. You will be asked to confirm your settings.
9Press [Enter]. Settings are confirmed.
10Reboot the Switch 2000 TR by returning to the main menu and selecting RESET. See “Resetting the Switch 2000 TR” on page
You are now ready to communicate with the Switch 2000 TR using IP and an
Setting Up the VT100 Console |
Switch 2000 TR Management Setup Fields
MAC Address
Displays the Switch 2000 TR unit MAC address.
Locally Admin Address
Use this field to assign locally administered addresses to the management port. You need to reset the Switch 2000 TR for the address to take effect. The Locally Administered Address field allows you to assign a unique MAC address to the unit. This feature is useful for identifying specific units by their addresses.
To set a Locally Administered Address, take these steps.
1Enter address in hexadecimal from the Locally Admin. field. This must be in the range of 400000 000000 to
7FFFFF FFFFFF.
2Select OK.
3Reset the Switch 2000 TR.
NOTE: The Locally Administered address will not be valid unless the Switch 2000 TR is reset. Refer to “Resetting the Switch 2000 TR” for instructions on resetting.
To reverse the Locally Administered address and revert to the resident MAC address you must enter all zeros and reset the Switch 2000 TR.