3Com TR manual Work Group ID, Device IP Address, Device SubNet Mask, Default Router

3-12CHAPTER 3: SETTING UP FOR MANAGEMENT

Work Group ID

The workgroup number for purposes of manage- ment. Management is only part of a single work- group and should be viewed as a sub-net. If you move your management setup to a new or different subnet, you will need to change the workgroup ID.

Device IP Address

You must assign a unique address to the device in this field. You change the IP address using this field.

Device SubNet Mask

You must assign a suitable network mask to the device in this field. For a class B address, 255.255.0.0 is suitable. You change the Device SubNet Mask using this field.

Default Router

Enter the IP address of the router with which the Switch 2000 TR communicates. You can change the Default Router IP address using this field.

NOTE: The above IP address parameters and Work Group ID will not be valid unless the Switch 2000 TR is reset.

SETUP TRAPS

Select this button to display the setup screen for SNMP trap parameters. Refer to Chapter 4.

SERIAL PORT

Select this button to display the setup screen for serial port parameters. Refer to Chapter 4.