Remote Polling (PING)
The Remote Poll screen allows you to send a single frame to a remote device. Use this feature to verify if a remote device is active and responding. It can help locate network problems and is also referred to as PING.
To use the Remote Poll feature, take these steps from the Switch 2000 TR Main Men:
1From the Switch 2000 TR Main Menu, select Remote Poll.
The TR Remote Poll screen appears.
Remote Polling (PING) |
When the poll is complete, the Round Trip Time dis- plays the interval in milliseconds between sending the frame to the target device and receiving a response at the Switch 2000 TR. If the target device does not respond within approximately 10 seconds, the field displays no reply.
Figure 6-8 TR Remote Poll Screen
2Enter the IP address of the device you want to poll in the Target Address field.
Follow the address notation conventions as illustrated on the Remote Poll screen.
3Select Poll.
