3Com manual 7TR Fault Log Screen

6-8CHAPTER 6: MONITORING THE SWITCH 2000 TR

Fault Log

The Fault Log displays read-only information about the Switch 2000 TR. The Fault Log updates whenever an abnormal condition occurs. This information is for internal 3Com use only. Your supplier may ask you to quote the Area and Fault Number if you report a problem.

To view the Fault Log, take these steps from the Switch 2000 TR Main Menu:

1Select STATUS and press [Return]. The TR Status screen appears.

2Select FAULT LOG and press [Return].

Time (seconds)—The time elapsed between the last reset when the fault occurred.

Area—Information useful for fault diagnosis by tech- nical support.

Fault Number—A hexadecimal number indicating the type of fault. Give this number to your technical support representative.

Figure 6-7TR Fault Log Screen

The TR Fault Log screen appears and the screen dis- plays the following:

Reset Count—The number of resets recorded at the time of the fault.