Environment Setup
Alarm(M)
:System makes beeping sound to alert when there is any activity in the selected time. 
When Alarm(M) button is pressed on : Alarm beeping works.
When Alarm(M) button is not pressed on : Alarm beeping does not work.
System beeps only when activity is detected in the selected time zone in recording schedule.
System does not beep if the camera is set to ‘continuous recording’
Brightness / Hue / Contrast
:Adjust Brightness, hue,and contrast
Default for camera is all “0” , and the range is
Enable / Disale Auto Gain
The brightness control for external monitor output is automatically controlled by the DVR system (The Auto gain function can only be selectable on the
Motion Detection Area
Select the camera number and draw detection area using left click dragging.
Maximum five detection area can be made.
To remove the selected motion detection area drag mouse pointer toward out of box.
Default
Restore the default color configuration for the camera by clicking [Default] button
Area draw
Entire area will be under motion detection mode when you click on [Area draw] button.
All area draw
Entire area for every camera will be under motion detection mode when you click on [All area draw] button.
Color/Monochrome
It sets the color or monochrome display of a conneced camera.
[Color/Monochrome] is operated by a toggle mode and when a connected camera is a monochrome one, it is necessary to set the display as the monochrome mode.
If the monochrome camera is connected under the setting of [color], the color of a specific camera may be in appropriately displayed.
Enable/Disable Convert Camera
: This function is to hide the image of each camera from the monitoring screen.
: This hide the image of the selected camera from the monitoring. 
: This does not hide the image of the selected camera from the monitoring screen.
[Notice]
•The camera having the function of security camera hides the image of camera from the monitoring screen but does not affect the recording.
•The camera having the function of security camera does not show the image even in the Viewer.
