Sanyo DSR-C100 instruction manual Pre-alarm recording flow

SETTING THE RECORDING METHOD

Pre-alarm recording flow

1

Pre-alarm (PRE1) area recording in progress

Images at 10:00:00 Images at 10:05:00

PRE1-ALARM REC	PRE1-ALARM REC	PRE1-ALARM REC	PRE1-ALARM REC	PRE1-ALARM REC	PRE1-ALARM REC
REMAIN SHOTS:6834	REMAIN SHOTS:6834	REMAIN SHOTS:6834	REMAIN SHOTS:6834	REMAIN SHOTS:6834	REMAIN SHOTS:6834

Post-alarm (POST1) area recording in progress

2

Images at 10:20:00 Images at 10:21:00

POST1-ALARM REC	POST1-ALARM REC	POST1-ALARM REC			POST1-ALARM REC	POST1-ALARM REC	POST1-ALARM REC
REMAIN SHOTS:6834	REMAIN SHOTS:6834	REMAIN SHOTS:6834			REMAIN SHOTS:6834	REMAIN SHOTS:6834	REMAIN SHOTS:6834
Post-alarm (POST1) area recording in progress			3	4	Post-alarm (POST2) area recording in progress
	Images at 10:24:00				Images at 10:25:00

POST1-ALARM REC

POST1-ALARM REC

POST1-ALARM REC

PRE2-ALARM REC

PRE2-ALARM REC

PRE2-ALARM REC

REMAIN SHOTS:6834 REMAIN SHOTS:6834 REMAIN SHOTS:6834 REMAIN SHOTS:6834 REMAIN SHOTS:6834 REMAIN SHOTS:6834

	Post-alarm (POST2) area recording in progress
5			6
	Images at 10:27:00	Images at 10:28:00

POST2-ALARM REC

POST2-ALARM REC

POST2-ALARM REC

POST2-ALARM REC

POST2-ALARM REC

POST2-ALARM REC

REMAIN SHOTS:6834 REMAIN SHOTS:6834 REMAIN SHOTS:6834 REMAIN SHOTS:6834 REMAIN SHOTS:6834 REMAIN SHOTS:6834

1Pre-alarm (PRE1) recording starts from 10:00:00

Images are stored to the pre-alarm recording area.

2An emergency situation develops at 10:20:00, and you want to record images in the post-alarm area.

Post-alarm (POST1) recording starts when the hold-up switch is pressed and held.

3Post-alarm recording is stopped at 10:25:00.

Post-alarm (POST1) recording stops when the hold-up switch is released.

4Backup recording starts.

If there is 20 minutes or more of available recording time remaining in the alarm recording area of the hard disk, pre-alarm (PRE2) recording starts automatically at 10:25:00.

5An emergency situation develops again at 10:27:00 and you want to record images in the post-alarm2 area.

Post-alarm (POST2) recording starts when the alarm switch is pressed and held.

6Post-alarm recording is stopped at 10:29:00.

When the hold-up switch is released, “ALARM REC FULL” appears on the screen and recording stops.

English 41