Part Names and Functions | Sanyo DSR-C100 specification

PART NAMES AND FUNCTIONS

Front panel
				1	3
				1
2
MENU	SET			NTSC
MENU	SET
				PAL
1	2 3	4	5	6
					4

1Operation panel cover

Remove this cover in order to use the MENU button and CURSOR button to operate the camera.

•Removing the operation panel cover Use a screwdriver to loosen the fixing screws, and then slide the operation panel cover to the left to remove it.

Note: Be careful not to drop the operation panel cover when removing it.

2Operation panel

1MENU button

This button is used to display menu screens.

2CURSOR button

This button is used to select items in the menu screens and to change settings.

In addition, it is used to select images to be played back and to select playback functions.

3SET button

This button is used to accept items selected in the menu screens and setting values.

4Extension port

This port is used to copy images to removable media such as a CompactFlash card.

5EJECT button (See page 70)

6NTSC/PAL select switch

This switch is used to select the video format. NTSC: NTSC format

PAL: PAL format

Note: This switch must be set before the power is turned on. If it is set after the power is turned on, the setting will be ignored.

6

English

Image 7

Sanyo DSR-C100 instruction manual Part Names and Functions

Contents

DSR-C100 Contents Formatting the memory card Function Operations Declaration of Conformity Information to User Precautions Accessories Features Part Names and Functions Front Panel Control terminals OFF Indicator Monitor display Camera status Monitor display Camera status Ni-Cd Backup Battery Installing and Handling Installing the Ni-Cd battery Basic connections Hold-up switch B Suspicion switchConnecting the power supply Connections RS-232C cable connection Connection to a computerComputer Hard disk recording areas Hard Disk Checking the hard disk Protecting the hard disk From Recording to Playback Turn on the power. See page 1 Press the Menu button Hard Disk Standby ModeSetting to standby mode Canceling standby mode Memo Menu Settings Menu screen display BClock settings BSystem settings Setting example To set the clock to 151520 on 2 August Setting the Clock Clock SETBefore setting System Settings System SET Palette Hard disk initialization Changing the alarm capacity Hard Disk Capacity Settings HDD SET Use the Cursor l button to select Week SUN Use the Cursor dor c button to set Mode ... onUse the Cursor l button to select Minute Summer Time Settings Summer TIME/DAYLIGHT SET KEY Word SET File ID a Camera ID Comment KEY Word Setting KEY Word SET Press the SET button Entering a file ID 1 character Enter ALL1 in same way Setting a camera ID 5 characters Entering a comments up to 36 characters Use the Cursor jor l button to select Example Set the password to CameraButton Change PASSWORD-DELETE OLD Password Example To change the initial setting of END to CMR Setting a password for initializing the hard disk OLD Password For Password or Camera ID setting For Camera ID and Comment settingsCorrecting characters 4Checking the Summer TIME/DAYLIGHT SET settings 1Checking the Clock SET settings2Checking the HDD SET settings 3Checking the System SET settings Illumination Setting the Recording MethodImage quality Post-alarm POST-1 recording Pre-alarm PRE1 recording Suspicion recording Pre-alarm recording flow 2Number of suspicion recording images Pre-alarm recordingScreen displays 1Display during recording Press and hold the H HOLD-UP switch rear panel Post-alarm recordingRelease the H HOLD-UP switch to stop recording Pre-alarm 2 PRE2 recording starts automatically Backup recording