SETTING THE CLOCK (CLOCK SET)

You need to set the date and time in order to use the camera. The recording functions of this camera cannot be used if the date and time have not been set. In addition, if the accessory Ni-Cd battery (for backup) which is used for running the clock and for hard disk backups has been replaced, you must reset the clock.

The setting time is displayed when “CONDITION” is selected from the MAIN MENU screen.

CONDITION

TIME: 08/02/2002 15:34:26

PRE: 15MIN

POST: 30MIN

SUSPICION:

150/

6834PCS

FRAMERATE: 3FPS

ST/DL: ON

FILE ID: A

 

ID:

COMMENT:

 

 

[MENU]

(MAIN MENU)

Note: The clock is set when the camera is first used, but if summer time has been set, the time will advance by one hour automatically during the summer time application period, so you may need to reset the clock.

Setting example: To set the clock to 15:15:20 on 2 August 2002

Press the MENU button to return to the SETTING screen.

1Use the CURSOR (l) button to select “SETTINGS” and then press the SET button. The SETTINGS screen will be displayed.

2Use the CURSOR (l) button to select “CLOCK SET” and then press the SET button.

The CLOCK SET screen will be displayed.

5Use the CURSOR (l) button to select “DAY ... 01” and then use the CURSOR (d or c) button to set the day to “02”.

6Use the CURSOR (l) button to select “HOUR ... 00” and then use the CURSOR (dor c) button to set the hour to “15”.

7Use the CURSOR (l) button to select “MINUTE ... 00” and then use the CURSOR (dor c) button to set the minutes to “15”.

8Use the CURSOR (l) button to select “SECOND ... 00” and then use the CURSOR (dor c) button to set the seconds to “20”.

9Use the CURSOR (l) button to select “FORM ... MM/DD/YYYY” and then use the CURSOR (dor c) button to set the desired format.

YYYY/MM/DD: Year/Month/Day

MM/DD/YYYY: Month/Day/Year

DD/MM/YYYY: Day/Month/Year

(CLOCK SET)

YEAR------------------

2001

MONTH-----------------

01

DAY-------------------

01

HOUR------------------

00

MINUTE----------------

00

SECOND----------------

00

FORM-----------

MM/DD/YYYY

CLOCK START-----------

YES

(CLOCK SET)

YEAR------------------

2002

MONTH-----------------

08

DAY-------------------

02

HOUR------------------

15

MINUTE----------------

15

SECOND----------------

20

FORM-----------

MM/DD/YYYY

CLOCK START-----------

YES

10 Use the CURSOR (l) button to select “CLOCK START ... YES” and then press the SET button.

The CLOCK START screen will be displayed, and the date and time which have been set will appear on the screen. The camera will

(Before setting)

(After setting)

return to recording mode after approximately 30 seconds.

3

4

Use the CURSOR (l) button to select “YEAR ... 2001” and then use the CURSOR (dor c) button to set the year to “2002”.

Use the CURSOR (l) button to select “MONTH ... 01” and then use the CURSOR (dor c) button to set the month to “08”.

If you select “NO”, the clock setting will not be changed, and the screen will return to the SETTINGS screen.

(CLOCK START)

2002/08/02 15:15:20

22

English

Page 23
Image 23
Sanyo DSR-C100 Setting the Clock Clock SET, Setting example To set the clock to 151520 on 2 August, Before setting