PAN/TILT Drive connection, Board | Samsung SPR-7416 specs

Appendix

4 PAN/TILT Drive connection

ON OFF

1 2 3 4

[I/O Board]

SIGNAL (+)

	EXTERNAL MONITOR
	RS-422 connection	No Use
	(from RX-Receiver)	No Use
	(from RX-Receiver)
	RS-232 Connection
	(from Com1 port)	SIGNAL (-)
	(from Com1 port)

[Notice]

• Be cautious about (+),(-) of the signal line.

Wrong connection of the signal line might cause damage.

•Please contact our distributor if you use other brand’s RX Receiver.

•The communication distance of the RS-422 connection cable is 1.2Km. (The distance can vary according to the type of cable connected. The Twist 2C cable is recommended.)

[Note]

•For the SPR-7116 Model, the external monitor connector on IO board is not operational, The external monitor connector on display board must be used.

5-4

5

External Sensor input and Control output connection

One line of signal line for sensors such as infrared rays, heat perception, magnetic etc, should be connected to COM connector and the other line is connected to any sensor 1-8 connector which you selected.

[Notice]

Please use individual adapter for each sensor’s power input.

Alarm, Siren, relay etc.		External Power (DC 12V)

•When the linked connection and control by external sensor works linked control output connects to COM port. (setup->hardware->alarm) Control output related by external sensor

it remains “NC” condition normally

but it switches to “NO” when it starts sending control signal

[Notice]

The power of adapter should be no more than 12V and 300mA.

Additional external relay should be used to control on and off of device powered by AC input.

5-5

Image 58

Samsung SPR-7416 manual PAN/TILT Drive connection, Board

Contents

Digital Video Recorder Samsung Eco-mark RoHS compliantPage Product Please check these out before using the systemMessage for problem Or serious casualty Damage to property Humidity or dust exist It might cause fire or electric shock It might cause an explosionIt might cause overheat, fire or electric shock It might cause damage This is only a recommendation-not essential Product Contents IV. Search Screen VI. SpecificationSpecification Appendix High picture quality, speed, and recording FeatureProduct Introduction Several Detection Data Backup How to control external monitor output qualityWhat is PTZ camera? Process multiple image Multi channel Video Surveillance Description MainscreenScreen Division Screen Division Rotation by division How to operateFull screen mode Full screen display State screen How to PreSet PAN/TILT Mode I Speed DomeFeature How to Preset Indicates current date and time Live Audio Data Outputting FeatureTo On/Off camera’s Power On/Off function for Camera light Environment Setup Hardware Hardware Camera Description Select Sensor AlarmHardware Sensor Function Recording time by sensor Input Sensor No Hardware Alarm FunctionSelect Alarm Input Camera No Select timeS Hardware External monitor DescriptionSelect Camera Out time by event System System System information Description System Backup setup Description Method to add backup schedule Method to select backup media Remote drive Indication of Backup statusDrive path Backup Select drive System reboot System S/W Update DescriptionCheck integral package file & program installation Select Package directory System Other Storage setup Clock 12 Hours or 24 Hours ModeDisplay setup Control card Port Saved by camera no Adjust the number of frames to be saved by cameraRecording/Display Recording frame rate per camera Ntsc 120 240, 640x240 480 You to record voice using audio boardScreen size Audio PAL 144 288, 768x288 576 Video data was not recorded Recording/Display Emergency Frame Interworked Audio Output Recording/Display Display Video loss AlarmInput Motion No Recording Period Big Display in 6 Division ModeRecording/Display Full Screen Fuctions VIP Video Interface Port Schedule Setup Holiday Motion detection screen Motion detectionFunctions Default AlarmMEnable / Disale Auto Gain Enable/Disable Convert Camera Network Network Description Password change Password setupNetwork Port Setting Password Setup Active On-Screen Keybaord On-screen KeyboardOn-screen Keyboard Display Functions Input Calendar Configuaton of Search ScreenRun Search Program Time indication and Expansion of graph region Camera Selection Screen Description Camera SelectionPlaying Recording Search Tools Recording during playback Display DelayBookmark Search Speed Audio Setup Search Tool Backup Data BackupImage Backup Image Backup How to use Watermark Checker Watermark Check Program Time backup Large Media CD-R/RW backup AVI backupBackup onto CD-R / CD-RW AVI backup Choose AVI Real Time backup file AVI Backup StatusAVI Real Time Backup File Select Compressor Print Search Screen AVI Real Time Backup File and Caption informationFollowing Error will occur if print setup is not completed Print Motion Search Motion Search Start the search of a selected part Stop Graph DisplayDisplay of graph in a Designated Part Appendix Formatting CD using Direct CD Formatting a CD using Direct CDCD format and backup Appendix Formatting a CD using InCD Formatting CD using InCD Click on the Confirm button to complete formatting Function of RS-232 Serial connection PAN/TILT Drive connection Board Install WebDVR Installing PPP in Windows Installation Procedure Appendix Setting Account Passwords and Options Click on Finish Appendix Description DVR Control Screen Surveillance mode Panorama DVR control mode closeZoom Channel selection SPR-7116 ModelDisplay Board Specification SPR-7416 Model Specification Page System is rebooted every 10 minutes System is rebooted early in the morning, periodicallyThat is the normal function of the computer Warranty Guide