Samsung SPR-7416 manual DVR Control Screen Surveillance mode

Appendix

10

5-10

DVR CONTROL BY

SSC-2000 KEYBOARD

1.After selecting [DVR] button from SSC-2000 system keyboard, enter DVR No. (0~255) of SPR Smart View which is interlocked with SSC-2000 keyboard by using the numeric keys and then press [ENTER] button.

DVR Control Screen (Surveillance mode)

	4div.	Search
0 0 1
SPR-7116	9div.	Emergency Rec
0 0 0	16div.	Alarm Off
	Rotate

Configuration of Control Screen

DVR No.

:This displays the no. of DVR connected to SSC-2000.

Model No.

:This displays the model no. of DVR connected to SSC-2000.

Monitor No.

:This displays the no. of monitor connected to SSC-2000. This is not used when controlling the DVR.

4 division screen

:If you select [4div] button from the surveillance screen, the screen shall be changed over to 4 division screen.

9 division screen

:If you select [9div] button from the surveillance screen, the screen shall be changed over to 9 division screen.

16 division screen

:If you select [16div] button from the surveillance screen, the screen shall be changed over to 16 division screen.

Sequence changeover

: If you select [Rotate] button from 4 division or 9 division mode, the screen shall be changed to the selected division mode in sequence.

Search mode changeover

:If you select [Search] button, the password input screen shall be displayed from SPR Smart View screen.

Enter the password from the password input screen and select [OK] button, the screen shall be changed over to the search mode screen.

Emergency Recording

:When the emergent recording is needed while monitoring, if you select [Emergency Rec] button, you can record all cameras regardless of the schedule. If you want to release the recording, select [Emergency Rec] button again and enter the password from the password input screen and then select [OK] button.

Alarm release

:This function is to force to stop the alarm output, when an alarm sounds in DVR.

Environment Setting

: If you select [ ] button to set the system, the password input screen shall be displayed for the

system security.If you enter the password from the password input screen and select [OK] button, the screen shall be changed over to the system setting screen.And LCD screen of SSC-2000 keyboard shall be changed over to the screen as below.

For direction button or [ENTER] button, you can use the direction button and [ENTER] button or Joystick of SCC- 2000 keyboard by moving them up/down/left/right and even use AF (Auto Focus) button.

If you select [ ] button, the screen shall be changed over to DVR control screen.

5-10