W1772/W1773 37" Drum Sander
7.Remove the bolts, flat washers, and hex nuts from the control panel support arm, as shown in Figure 10.
8.Remove the right access panel.
9.With assistance, lift the control panel into place and secure it with the bolts, flat washers, and hex nuts removed in Step 7.
10.Reinstall the right access panel.
11. Attach the brace from the control panel to the sander as shown in Figure 11.
12. Place the handwheel over the shaft shown in Figure 12 and tighten the set screw in the handwheel hub.
Figure 10. Control panel mounting bolts.
SET UP
