Woodstock W1772, W1773 owner manual Unpacking, Items Needed for Setup, Inventory

W1772/W1773 37" Drum Sander

SETUP

SET UP

Unpacking

This machine has been carefully packaged for safe trans- portation. If you notice the machine has been damaged during shipping, please contact your authorized Shop Fox dealer immediately.

Items Needed for Setup

The following items are needed to complete the set up process, but are not included with your machine:

Description		Qty
• Safety Glasses (for each person)		1
• Power Lifting Equipment (forklift)		1
• Lifting Straps (min. 2000 lb capacity)		2
•	An Assistant	1
• Power Cord (length as needed)		1
•	Power Disconnect Box	1
•	Dust Collection System	1
• Dust Hoses 4" (length as needed)		4
•	Hose Clamp 4"	4

Inventory

The following is a description of the main components shipped with the Model W1772/W1773. Lay the compo- nents out to inventory them.

Note: If you can't find an item on this list, check the mounting location on the machine or examine the pack- aging materials carefully. Occasionally we pre-install cer- tain components for safer shipping.

Box Inventory (Figure 6)		Qty
A.	Drum Sander	1
B.	Control Panel	1
C.	Handwheel	1
D.	Top Cover	1
Tools (Not Shown)
	—Hex Wrenches 4, 5mm	1 Ea
	—Wrenches 12/14	1
	—Phillips Head Screwdriver	1
	—Spring Tension Tools	2
	—Paper Retaining Clips	2
	—Rubber Plates (Dust Scoop)	2

SUFFOCATION HAZARD!

Immediately discard all

plastic bags and pack-

ing materials to elimi-

nate choking/suffocation hazards for children and animals.

OFF

Disconnect power to the machine before you do any assembly or adjust- ment tasks! Otherwise, serious per- sonal injury to you or others may occur!

A

B

D

C

Figure 6. W1772/W1773 inventory.

-14-