3 Getting Started
This section provides information on setting up and using your thin computer, power management, and the graphics system.
Setting Up Your Thin Computer
To quickly set up your thin computer follow the next three simple steps.
Step 1 - Install the Battery
With your thin computer turned off, insert battery in the battery compartment located on the underside of the thin computer and secure it by sliding the latches.
1.Slide the battery lock (3) to unlock.
2.Slide and hold the battery release latch (1) as you gently insert the battery (2) into the battery compartment. Make sure the battery is properly orientated.
3.Make sure that the battery lock (3) locks back into position.
Figure 3-1 Battery Latches
Step 2 - Connect the Power Cable
Plug the power adapter connector to the thin computer as shown. Plug the AC power cable to the power adapter, and then plug the other end of the power cable to a wall outlet.
