Connecting a Printer, Power Management | Wyse Technology 909522-41L

Chapter 3

first move the pointer over the object you want to select, and then press the left button one time. The functions of these buttons are software specific.

5.Double-clickingis a common technique for selecting objects or launching programs from icons. Once you have moved the pointer over the object you wish to select, rapidly press the left button two times. This action is commonly referred to as “double-clicking” an object.

Dragging

There are two ways to drag:

•Move the pointer to the desired location then press down the left button. While still holding down the left button, move the pointer to the desired location. Release the button.

•Move the pointer to the desired location. Tap the touch pad twice quickly as if you were double-clicking; however do not remove your finger after the second tap. Move the cursor to the desired location. Lift your finger to finish dragging.

Adjust the touch pad settings by clicking Start Settings Control Panel Mouse Buttons. These settings allow you to change the orientation of the touch pad from right-handed to left-handed and fine tune the pointer movement and timing of clicks.

Scrolling

When you want to scroll through a document, you may scroll with the touch pad. To scroll vertically, drag your finger along the right side of the touch pad. Making this motion is the same as dragging the vertical scroll box with your mouse.

Touch Pad Precautions

The touch pad is a pressure-sensitive device. If not properly cared for, it can be easily damaged. Please take note of the following precautions:

•Make sure the touch pad does not come into contact with dirt, liquids or grease.

•Do not touch the touch pad if your fingers are dirty.

Do not rest heavy objects on the touch pad or the touch pad buttons.