Wyse Technology 909522-41L manual Turning Off the Thin Computer, Removing the Battery, Chapter

10	Chapter 3
	Figure 3-2 Connecting the Power Cable

Note

You can connect the power adapter at any time with the thin computer turned either on or off.

Step 3 - Turn On the Thin Computer

Raise and adjust the lid, and press the power on/off button for two seconds. When you release the power on/off button, the power LED on the system indicators lights up.

After power-on, the thin computer goes through several boot sequence procedures before the operating system loads. See "Setting Up Access to the Enterprise Servers" for information about setting up your server environment. Additional information is available in the thin computers’ operating system documentation, Administrators Guide: Wyse® 9 Series, Based on Microsoft® Windows® XP Embedded.

Turning Off the Thin Computer

Press the power on/off button for two seconds, or go to Start Shut Down, choose Shut Down in the Shut Down Windows dialog box, and click OK.

Removing the Battery

With your thin computer turned off, slide the battery lock to unlock, and then slide and hold the battery release latch to gently pull the battery out of the battery compartment.

Caution

Before removing battery, turn off the thin computer and disconnect the power adapter from the electrical outlet.