X10 Wireless Technology MK19A manual To SET the X-10 Sleep Timer, Changing the X-10 House Code

TO SET THE X-10 SLEEP TIMER

The X-10 Sleep Timer switches off the chosen modules after the preset time.

1.Press and release the X-10 button.

2.Press and hold TIMER until the LED indicator lights steadily. Release the TIMER button.

3.Use the number buttons to enter the module Unit Code for the module to be turned off.

4.Press the desired function button (e.g. CH - to turn the module off, or CH+ to turn it on, after the preset time).

5.Using the number buttons enter the sleep time desired (1 to 99 mins).

6.Press ENTER to confirm the setting.

CHANGING THE X-10 HOUSE CODE

The Mouse Remote defaults to House Code A, and in most cases you will not need to change this unless you are experiencing interference from a neighboring X-10 system.

1.Press and release the X-10 button.

2.Press and hold SETUP until the LED indicator lights steadily. Release the Setup button.

3.Use the number buttons to enter the number equivalent to the chosen House Code (1=A, 2=B

..16=P).

4.Press the ENTER

button to confirm the House Code. The LED turns off.

Note: The Housecode you choose must match the Housecode on the Transceiver Module you are using it with.

42 43