Installation - Windows NT/2000/XP
This section is the installation instructions for Windows NT/2000/XP only.
IP Address Configuration
When using the IP Address interface, use the keys on the front panel to set the address as follows:
•Reset key increases the current number flashing by one.
•Menu key moves to the next number to the right of the current number flashing.
•Test key moves to the next number to the left of the current number flashing.
•Enter key accepts new address (if valid) and returns to I/F:IP Address menu. The menu will display a message if the address entered is invalid.
Note: You must turn off the printer and restart it for the new IP address to take effect.
Fig. 73 Click Install Printer.
Fig. 74 Make Appropriate Selections. Click OK.
Fig. 75 Enter IP Address (Network Installation only).
Fig. 76 Read Setup Information. Click Yes.
19
