Planning the Installation
AC and DC Components including wire and breaker sizes
For a successful installation, you need to plan for AC and DC components including planning for wire and breaker sizes to be used in the power system. The AC and DC components are described in this section.
AC components include:
•AC Input
•AC Loads
•AC Disconnect and
•Distribution Panels
•AC Wiring
•AC Output Neutral Bonding
DC components include:
•Batteries
•DC Disconnects and
•DC Cabling
•DC Grounding
IMPORTANT: Figure 2 does not show all required grounding and overcurrent protection.
Sine Wave Inverter/Charger | |
AC Out | AC In |
DC + |
|
DC Fuse |
|
DC - |
|
House Battery |
|
AC Main Panel | |
Battery Temperature |
|
Sensor | Isolator |
| |
Inverter AC Panel
Low Voltage DC
Figure 2 Sample Vehicle Electrical System Configuration
Engine Battery
Alternator
This guide for use by qualified installers only.
5 |
