Planning the Installation
Unpacking and Inspecting the Freedom SW 2000 Inverter/Charger
HEAVY LOAD
The Freedom SW 2000 Inverter/Charger is heavy (see “Inverter/Charger Physical Specifications” on page 36). The unit is too heavy for one person to safely lift and mount. Xantrex recommends that two people lift and mount the unit. Always use proper lifting techniques during installation to prevent personal injury.
Failure to follow these instructions can result in minor or moderate injury.
To unpack and inspect:
IMPORTANT: Keep the carton and packing material in case you need to return the Freedom SW 2000 for servicing.
1.Unpack the unit and check the materials list. If anything is missing from the shipping box, contact Xantrex Customer Service. See “Contact Information” on page i.
2.Record the serial number of the Freedom SW 2000 and other purchase information in the “Warranty and Product Information” section of the Freedom SW 2000 Sine Wave Inverter/Charger Owner’s Guide. You will be asked for this product information if you need to call Xantrex Customer Service.
3.Save your purchase receipt to use as
4.Save the original shipping carton and packing materials. If the inverter/charger needs to be returned for service, it should be shipped in the original carton. Packing the Freedom SW 2000 in the original shipping carton is also a good way to protect the inverter/charger if it ever needs to be moved.
12 | Freedom SW 2000 Installation Guide |
