Installing the Inverter/Charger
Figure 4 DC Terminal Covers
Figure 3 DC Cable Connections
7.Before proceeding, check that the cable polarity is correct: POSITIVE
(+) on the inverter/charger is connected to the POSITIVE (+) on the battery, and NEGATIVE
IMPORTANT: The next step is the last cable connection you need to make.
A spark is normal when this connection is made.
8.Connect the other end of the cable to the NEGATIVE
9.Use a wrench to tighten the nut to a torque of
10.To protect the DC terminals, attach the DC terminal covers (Figure 4) to the inverter/charger, using the screws provided.
This guide for use by qualified installers only.
27 |
