Xantrex Technology Freedom SW 2000 user service AC Components, AC Input, AC Output, AC Loads

AC Components

AC Input

AC input to the Freedom SW 2000 can be supplied from a single-phase 120-volt 60-Hz AC source such as the utility grid (power company), a generator, or the output of a transfer switch.

AC Output

AC output from the Freedom SW 2000 is 120 Vac/60 Hz.

AC Loads

The Freedom SW 2000 is intended to power loads consisting of 120 Vac appliances.

In Invert mode, the Freedom SW 2000 provides 120 Vac to loads connected to AC output. In AC pass-through mode, the source connected to the AC input is passed through (sometimes called bypass current or pass-through power) to the load. Because of the way invert mode operates, only 120 Vac appliances can be connected to the Freedom SW 2000 output.

ELECTRICAL SHOCK HAZARD

Do not connect 240 Vac loads to the Freedom SW 2000 outputs. Doing so may result in 120 Vac on exposed parts of the appliance.

Failure to follow these instructions will result in death or serious injury.

Planning the Installation

AC Disconnect and Over-Current Protection Devices	only.
To meet CSA, UL, and electrical code requirements, and to protect system
wiring, the AC inputs and outputs of the inverter/charger must be provided	installers
simplicity the following refers to breakers). Refer to your applicable
with over-current protection on both the AC input and output. This
protection may be a circuit breaker or a fuse with a disconnect device (for
installation codes and the following requirements:	qualified
AC Input Protection
The breaker protecting the AC input of the Freedom SW 2000 must be	by
approved for use on 120 Vac branch circuits. The breaker must be rated at
no more than 30 amps. This single input breaker must provide the Freedom use
SW 2000 with sufficient power for operating the battery charger including	for
pass-through power (to operate downstream AC appliance loads). The
	guide
Freedom SW 2000 does not have a power sharing feature. Refer to the
owner’s guide for more details on AC current that is required to charge
batteries.	This

975-0527-01-01 7