Xantrex Technology M370078-01 II Assigning an IP Address to the Power Supply Unit, To assign an IP address to the power supply unit:

Ethernet (ENET)

Figure 2-13Selecting Network Adapter

Assigning an IP Address to the Power Supply Unit

If your system is auto-IP configured, the following warning message is displayed:

Figure 2-14Auto-IP Address Message

Important: Auto-IP mode is acceptable only for the single computer and single power supply configuration.

To assign an IP address to the power supply unit:

1.Click OK to dismiss the Auto-IP warning message. If you are not intending on using an Auto-IP, debug your network connection at this time.

The Lantronix DeviceInstaller window appears. See Figure 2-15.

2-12 M370078-06