Xantrex Technology M370078-01 II Establishing Communication with the Power Supply, Call, ASCII Setup, File > Save As…, To establish communication with the power supply:

Terminal Configuration

3.Click the ASCII Setup button.

The ASCII Setup dialog box will appear as shown in Figure 2-26.

4.Verify that the ASCII Sending and ASCII Receiving boxes are checked as shown in Figure 2-26.

Figure 2-26ASCII Setup Dialog Box

5. Click OK.

Establishing Communication with the Power Supply

To establish communication with the power supply:

1.In the main HyperTerminal window, click Call. See Figure 2-27.

2.To verify that the XG unit is connected and functioning, type the following command "*ADR <#>;*IDN?" where the <#> should be replaced by the address assigned to the power supply in the “Selecting ENET as the Communication Port” on page 2–17.

3.Verify that the XG unit responds with the ID string.

4.To save your session for future use, click File > Save As…. See Figure 2-28.

M370078-06 2-23