Terminal Configuration
Terminal Configuration
The terminal program allows for communication with the power supply. To use a terminal program, set it up using the parameters from the following sections. If you wish to use HyperTerminal, see “Setting Up a HyperTerminal Connection” for instructions.
Data Format
Serial data format is 8 bit, one stop bit. No parity bit. Flow control: none.
End of Message
The end of message is the Carriage Return character (ASCII 13, 0x0D).The power supply ignores the Line Feed (ASCII 10, 0x0A) character.
Setting Up a HyperTerminal Connection
To set up a HyperTerminal connection:1.Start Windows HyperTerminal by clicking Start >All Program >Accessories > Communications > HyperTerminal.
Figure