Configuring the Device Using DeviceInstaller
2.Click Search to get a list of all the XG devices that can be reached from the network adaptor that you previously selected. If your XG unit (s) are powered up, they should appear in this list.
Figure
After a short delay, your power supply will be found. See
Figure
3.If the IP address shown and the method that the XG unit is using to obtain this address is correct, stop here and exit/close this window. Otherwise, continue to step 4.
4.Expand the Local Area Connection tree; if necessary, expand further until the IP address of the XG unit is displayed. Then left click the IP address; the screen should display as shown in Figure