Basic Section

Network Topology and Connection

The following section describes the network topology for the single computer and single XG power supply unit. The other possible network topologies will be discussed later in the “Advanced Section” on page 2–

26.The additional topologies build on the configuration ideas present in this section by referencing the various setup instructions.

Single Computer and Single Power Supply Unit

Figure 2-6shows the connection between the ENET unit and Local Computer through a crossover cable; however, a HUB could also be used with straight through Ethernet cables as well. Connect your computer to the ENET as shown in Figure 2-6,or if this topology does not match your configuration, refer to the “Advanced Section” on page 2–26to identify the topology you wish to implement and follow the instructions described in that section.

Local Computer

ENET

Power Supply

Figure 2-6Single Computer, Single Power Supply

M370078-06

2-5