Xantrex Technology M370078-01 II Settings, Disconnect, Properties, Host address, Connect using:, To specify the terminal connection properties:

Terminal Configuration

5.In the Connect using: box, select “TCP/IP (Winsock)”.

6.In the Host address box, enter the IP address, obtained in step 14 of the section entitled “Assigning an IP Address to the Power Supply Unit” on page 2–12.

7.In the Port number box, enter “10001” as the value.

8.Click OK.

To specify the terminal connection properties:

1.Click Disconnect if necessary, and click Properties in the main HyperTerminal window. See Figure 2-23.

Figure 2-23Main Terminal Window

2.In the ENET Properties window, click on XGthe Settings tab. See Figure 2-24.

M370078-06 2-21