Operator Interface
152607 2–21
Setting the Date and Time
Follow the procedure below to change the date and tim e.
To change the Date and Time:
1. From the standard display, press the <MENU> key. This will prompt the user
for the password. The LCD will change the third and fourth lines of the LCD
display as follows:
Type and
Hit ENTER
Password:
”.
2. Enter the password <5><9><4> and press the <ENTER> button.
3. Scroll down with the \/ key until date or time parameters are reached.
a) If you’re changing the date, the third and fourth lines of the L CD will
display as follows:
Type and hit ENTER
Set Date: MMDDYY
b) If you’re changing the time, the third and fourth lines of the LCD will
display as follows:
Type and hit ENTER
Set Time: HHMMSS
4. Press <ENTER>. Enter the proper date or time in a six digi t format. For
example:
a) The date is entered month-day-year (mmddyy):
April 28, 2005 is entered
042805
<ENTER>.
b) The time is entered in military hours-minutes-seconds
(i.e., 24-hour clock): 4:30 pm is entered
163000
<ENTER>.
If a mistake is made while entering the da te or time, the /\ and \/ keys may be
used as a backspace key. Any two-digit yea r “YY” may be entered for the
date, but regardless of the keyed entry, the maximum Mo nth/Day “MMDD”
that the UFCU will accept is a “1231” or Dec. 31st. The maximum allowable
time entry the UFCU will accept is “235959”.
5. Once the entry is accepted, the third and fourth lines of t he LCD display will
revert back to the following:
a) If you’re changing the date, the third and fourth lines of the L CD will
display as follows:
Hit ENTER to set
Set Date:
b) If you’re changing the time, the third and fourth lines of the LCD will
display as follows:
Hit ENTER to set
Set Time:
6. Pressing the <MENU> key will return the user to the standard display.