Xantrex Technology XPD 7.5-67, XPD 60-9, XPD 120-4.5 Additional Specifications, Input Conditions

Section 1. Features and Specifications

Additional Specifications

1.Front output current limited to 30 A maximum.

2.For input voltage variation over the AC input voltage range, with constant rated load.

3.For 0 to 100% load variation, with constant nominal line voltage (rear output only).

4.Current mode noise is measured from 10% to 100% of rated output voltage, full current, resistive load.

5.Maximum drift over 60 minutes with constant line, load, and temperature, after power on.

6.Maximum drift over 8 hours with constant line, load, and temperature, after 60-minute warm-up.

7.Change in output per ° C change in ambient temperature, with constant line and load.

8.Typical efficiency is measured at 120 V and full output power.

Additional Specifications

Rise Time (No load, full load)	50 ms
Fall Time (Full load)	50 ms
Fall Time (No load)	400 ms
Voltage Mode Transient Response	1 ms
Time delay from power on until output stable	3 s maximum

Input Conditions

Rated AC Input Voltage	100/120/200/230/240 Vac, universal input
Maximum AC Input Power	700 W
Operational AC Input Voltage Range	85 to 264 Vac; power factor corrected
Maximum Input Current	7 A maximum at 100 Vac, 6 A maximum at
	120 Vac, 3 A maximum at 220 Vac
Input Frequency Range	47 to 63 Hz
Power Factor	0.98 minimum for full load at nominal
	voltage
Input Harmonic Distortion	Current harmonics meet IEC 1000-3-2

Release A 19